MC RESISTORIproducts

The T14G series power resistors are made of specific resistive elements inserted and cemented in an anodized IP54 aluminum box.

These materials are fireproof and in case of failure, the aluminum box is leakage proof.

he shape of the box allows reaching high powers, since the extremely high dissipation level allows the highest possible dissipation and absorption of large amounts of impulsive energy.

These resistors can be used inside electrical panels, mounted on dissipaters of metallic plate.

• Extremely convenient dimension vs performance ratio
• Extremely noise controlled
• RHOS compliant
• CE Marked

TYPICAL APPLICATION

• Power electronics for inverter controlled
  braking motors
• Drives

SPECIAL APPLICATION

• with thermostat

• MAX POWER USE: up to 60 minutes
• TOLERANCE VALUE: +/- 10%; +/- 5%; +/- 2%
• TENSION LIMIT 2000V
• ISOLATION RESISTANCE: > 500Mohm @ 500VDC
• ELECTRICAL ISOLATION: 500Hz 60” 3500V
• MAX TEMPERATURE: 300°C
• CONNECTION WIRES: 350mm
• Vitreous silicon rubber wire TS2V CU/NI 4mm section up to 250°C@500V resistant compliant with IEC EN 60228 cl5 & CEI EN 50363